- Choice of 53" or 61" swing over bed x 78"-472"bc
- Superior European Quality built for heavy-duty operation
- CNC Siemens 810 D POWERLINE Manual Turn
or Fanuc controls
- Massive, extra stable 40" wide bed, 'solid' base from floor
to front way
- Choice of large 5.5", 8.6", 12.5", 14.2'' and 17.6'' spindle bore
- Up to 75 HP
- High speeds will handle wider range of parts;
5.5" bore offers 2-900 rpm
- C axis Live tooling option (and even Y axis)
- Third movable hand wheel for easy toolsetting
- Automatic shifting 2 range headstock for greater HP and torque
Optional Equipment. |
- Gap bed allows swing up to 69" in Gap (TUR1550MN)
- Pivotable control panel
- Full rear guarding and one front door guard std.
- X axis Linear direct feedback scale std.
- Z axis Linear measuring system for 236"-472" bc
- Built in Chip Conveyor standard; high efficiently front location
- Rapids rates to 393 IPM reduces non-cut times
- Heavy-duty tailstock rides on air cushion with come-along, for operator ease
- Large 7.9" dia. quill with built-in live center
|
| |
| |
TUR1350 MN |
TUR1550 MN |
| CAPACITY |
| Distance between centers |
78”, 157”, 236”, 315”, 393”, 472" |
| Swing over bed |
53.1” |
61” |
| Swing over saddle |
35.4” |
43.3” |
| Swing over gap |
61” |
68.9” |
| Length of gap |
22.8” |
| Max. workpiece weight: |
|
Between centers without steadies
|
19,800 lbs |
with one steady
|
26,400 lbs |
with two steadies
|
33,000 lbs |
In chuck only
|
4,400 lbs |
| BED |
| Width of bed |
40.1” |
| Height of bed |
29.7” |
| HEADSTOCK |
| Number of spindle ranges |
2 |
| Spindle speed ranges with 5.5” bore |
2-200 rpm and 180 - 900 rpm |
| Main drive, Continuous / 40% duty |
50HP / 75 HP |
| Max. turning torque |
6110 Ft. Lb |
| Spindle nose 5.5”, DIN55026 (option) |
A2-15 (A2-20) |
| Spindle bore , standard |
5.51” |
| Diameter front bearing, standard 5.5” bore |
9.8” |
| Spindle bore options |
8.6”, 12.5”, 14.1" or 17.7" |
| CARRIAGE |
| Cross slide travel X-Axis |
29.5” |
30.5” |
| Rapid speed Z / X axes |
315 IPM (8 m/min) / 393 IPM |
| Max. force X-Axis |
5,500 lbs |
| Max. force Z-Axis |
7,700 lbs |
| Ball screw dia., X-Axis |
1.57” |
| Ball screw-dia. Z-Axis |
2.5” (63 mm) ball screw for 78” and 157”bc or |
| or Gear drive (GD) |
GD master/slave dual motor system for 236”-472”bc |
| Carriage length bearing on bedways |
45.3” |
| T-slot riser for manual toolpost |
standard |
| 8-position Disc type turret |
VDI 60 DIN69880, optional |
| 4-position head type turret |
NG 40 DIN68881, optional |
| TAILSTOCK, built in ‘live’ quill |
| Quil diameter |
7.9” |
| Quill taper with built-in live quill |
6 MT |
| Quill stroke |
5.9” |
| MACHINE DIMENSIONS |
| Machine length |
b.c. + 118” |
| Machine width {for transport} |
117” {98”} |
| Machine height |
94.5” |
96.5” |
| Machine weight: 157”bc |
45,560 lbs. |
47,320 lbs. |
| 236” bc |
52,100 lbs. |
53,800 lbs |
|
