Headstock fitted to rear V-way for greater rigidity
OPTIONAL EQUIPMENT (move cursor to item name to view image):
Taper Turning Attachment
Steady Rests
Follow Rest
Chucks (3-jaw, 4-jaw)
Live Centers
CAPACITY / MODEL
25" (TUR-630)
28" (TUR-710)
Swing over bed
24.8"
28"
Swing over cross slide
14.8"
17.3"
Distance between centers
78 ",118",157"
78 ",118",157"
HEADSTOCK
MODEL S
Spindle bore
4.1"
4.1"
Spindle nose (Camlock)
D1-8
D1-8
24 Spindle speeds
18-1800 RPM
14-1400 RPM
Spindle Bearings
Front - angular contact ball bearings (SKF), 8.2” O.D.
MODEL A
Spindle bore
5.5"
5.5" (special order)
Spindle nose (Camlock)
Dual D1-11
Dual D1-11 (special order)
21 Spindle speeds
15-1400 RPM
15-1400 RPM
FEEDS & THREADS
42 longitudinal feeds
.002 - .121 IPR
42 cross feeds
.001 - .060 IPR
42 inch threads
1-88 TPI
42 metric threads
1-88 mm/rev
Leadscrew diameter
1.6" (4 TPI)
CARRIAGE
Cross slide travel
13"
15"
Carriage length bearing on ways
24"
24"
Cross slide width x length
9" x 31", with dual T-slots for rear fixturing
Saddle length supporting cross slide
36"
38.5"
Top slide travel
6"
6"
4-way rapid traverse (longitudinal/cross)
220 IPM/110 IPM
220 IPM/110 IPM
TAILSTOCK:
Quill diameter
3.9"
Center, morse taper
MT 5
Quill travel
8"
MISCELLANEOUS:
Main drive motor
20HP
20HP
Tri V bed (width x depth)
17" x 15.2"
17" x 15.2"
Number of legs supporting bed
3 for 78 " b.c. and 4 for 118" - 157" b.c.
Machine weight, 80" b.c.*
*(add 700 lbs for each
additional 40" b.c.)
9,500 lbs*
9,900 lbs*
TOOLMEX Machinery Division, is a National importer of European quality Machinery, specializing in MN/CNC long bed Lathes from 22" -98" swing x 78-572"bc with spindle bores from 4-25. We are located near Chicago, only 20 minutes from O'Hare airport.
