| |
|
TUR 630MN / 630AMN |
TUR 710MN / 710AMN |
| Capacity |
| Swing over bed |
24.8” |
27.9” |
| Swing over saddle |
14.6” |
17.7” |
| Distance between centers (bc) |
78", 118", 157” |
| Max weight in chuck |
1,320 lbs |
| Max work piece weight bc |
4,400 lbs |
| Headstock |
| Spindle bore, std. |
4.1” |
| Spindle bore, optional “A” version |
5.5” |
| Spindle nose, std. (A version) |
D1-8 (dual D1-11) |
| Spindle speed range |
5-2,500 RPM (5-1800 RPM for 5.5" bore) |
| Number of Ranges |
2 |
| Main Drive power, Siemens |
16 HP continuous / 23 HP at 40% duty |
| Max turning Torque, std. (A version) |
1,550 ft. lb (2,100 ft. lb) |
| Carriage |
| Cross slide travel, X axis |
15.3” |
16.1” |
| Rapid Travel rate in X or Z axes |
315 IPM |
| Feed thrust X / Z axes |
2,000 lbs / 3,000 lbs |
| Z axis Ball Screw Dia. 40-118” {157”} |
1.6” (40mm) {2.5” (63mm)} |
| X axis Ball Screw Dia. |
1.26” (32mm) |
| Carriage length |
24” bearing on bedways |
| Width of cross slideways |
9” |
| Tailstock |
| Quill Diameter |
3.9” |
| Quill taper |
MT 5 |
| Quill travel |
7.8” |
| General |
| Bed Width |
17” wide TRI-V bed design |
| Length of lathe |
between centers + 118” |
| Width of lathe |
90.5” |
| Weight of lathe x 78”bc |
11,100 lbs |
11,300 lbs |
| Weight of lathe x 118”bc |
12,800 lbs |
13,000 lbs |
|
