|
TUR800MN |
| Capacity |
| Swing over bed |
31.5” |
| Swing over saddle |
19.7” |
| Distance between centers |
78-118-157-236 (2,3,4,6 M)” |
| Max. workpiece weight in chuck |
2,200 lbs |
| Max. workpiece weight b.c. |
8,800 lbs. |
| Headstock |
| Type |
|
2 range headstock with CSS in each range |
| Spindle speed, std. 5.5” bore |
4-360 and 200-1800 rpm |
| Main Drive motor, Continous duty / 40% duty |
30 / 45 HP (optional 50 / 75 HP) |
| Max. turning Torque |
3020 ft-lb (4100Nm) |
| Spindle nose camlock |
|
D1-11 front (rear nose optional) |
| Spindle bore |
|
5.5” |
| Front bearing |
|
9.8” |
| Saddle / cross slide |
| Cross slide travel X-axis |
19.9” |
| Rapid travels, Z and X axes |
235 IPM |
| Feed force cross, X-axis |
3300 lb f (15 kN) |
| Feed force longitudinal, Z-axis |
4400 lb f (20 kN) |
| Ball screw dia., Z-axis |
2.5” (63 mm) |
| Ball Screw dia., X-Axis |
1.6” (40 mm) |
| Carriage length bearings on bedway |
31.9” |
| Width of cross slideways |
14” |
| T-slot riser for toolpost, std |
standard |
| Automatic toolturret 8-pos. disc type |
VDI 50 optional |
| Automatic toolturret 4-pos. head type |
optional |
| Tailstock |
| Quill diameter, std. / optional |
4.9” / 5.5” |
| Quill taper, morse taper |
MT 6 |
| Quill stroke |
11.8” |
| General |
| Voltage, standard |
440v/3ph/60hz |
| Width of bed, TRI-V type |
24.4” with extra HD V ways” |
| Total length of lathe |
bc + 96” |
| Width of machine |
105” |
| Height of machine |
79” |
| Weight of Machine x 118”bc (approx.) |
19,200 lbs |
| For each additional length 40” bc, ADD |
2,200 lbs |
