Toolmex Corporation - Machine Tool Division

About Toolmex

Bison/TMX Tools

Elektrim Motors

Machine Tools

Toolmex UK

About Us

News

Products

SPECIALS

Literature

Spare Parts

Service

Contact Machine Tools

Manual Plus CNC Lathes

CNC Lathes

Manual Lathes

22" MN

25" to 28" MN

32" MN

37" to 43" MN

53" to 61" MN

52" to 57" 4 way

67" to 94" 4 way

TUR 930/1100 MN/CNC Manual Plus CNC Lathes

Manufactured by:

Top European-built quality and design
37" or 43" swing x 78", 118", 157", 195" or 236" bc
Choice of Siemens or Fanuc cycle controls
Operate in Manual, Semi-automatic or G code modes
30 / 40 HP main drive (option to 50/70 HP) with CSS and
2 range headstock
Big 5.5", 8.6", 12.5" or 14.2” spindle bores with speeds to 1800 rpm
One piece bed castings to 20' bc
24.5" wide TRI-V bed design, extra wide V ways
for stability
Up to 11,000 lbs bc with steadies
(option to 15,000 lbs)
Heavy-duty tailstock with 5" dia quill (option 5.5")
Easy operators controls with independent traveling panel
Extra heavy-duty headstock for increased torque and load capacity
Wide range of options including: turrets, hyd. chucks and steadies, C axis with 'Live' tools, chip conveyor, etc.

Optional Equipment.

Steady Rests (1.3" to 30")
Follow Rest (1" to 10")
4-way Sauter Head Turret
Quick change toolpost
8 position SAUTER Disc Turret (optional “live” tooling version)

3-Jaw chucks, 12"- 25" dia.(manual or power)
4-Jaw chucks,16"- 32" dia.
C Axis positioning & locking
Boring Bar Holder, mounts to cross slide
Chip Conveyor; 5.5" dia. quill

		TUR930MN	TUR1100MN
Capacity
Swing over bed		37.4”	43.3”
Swing over saddle		24.8”	31”
Distance between centers		78", 118", 157", 195", 236”
Max. workpiece weight in chuck (option)		2,200 lbs (4,400 lbs.)	2,200 lbs. (4,000 lbs.)
Max. workpiece weight b.c. (option)		8,800 lbs. (13,200 lbs.)	8,800 lbs. (13,200 lbs.)
Headstock
Type		2 range headstock with CSS in each range
Spindle speed, std. 5.5” bore		4-300 and 160-1200 rpm
Main Drive motor, Continous duty / 40% duty		30 / 45 HP (optional 50 / 75 HP)
Max. turning Torque (option)		3600 ft-lb (4815 ft-lb)	3600 ft-lb (4815 ft-lb)
Standard 5.5" bore	Spindle nose camlock	D1-11 front (rear nose optional)
	Spindle bore	5.5”
	Front bearing	9.8”
8.6” bore	Spindle bore / nose	8.6” / A2-15 front (rear nose optional)
	Max spindle speed	700 rpm (increased torque)
12.5” bore	Spindle bore / nose	12.5 “/ A2-20 front (rear nose optional)
	Max spindle speed	500 rpm (increased torque)
14.1” bore	Spindle bore / nose	14.17“/ A2-20 front (rear nose optional)
	Max spindle speed	350 rpm (increased torque)
Saddle / cross slide
Cross slide travel X-axis		22.4”	24”
Rapid travels, Z and X axes		235 IPM
Feed force cross, X-axis		3300 lb f (15 kN)
Feed force longitudinal, Z-axis		4400 lb f (20 kN)
Ball screw dia., Z-axis		2.5” (63 mm)
Ball Screw dia., X-Axis		1.6” (40 mm)
Carriage length bearings on bedway		31.9”
Width of cross slideways		14”
T-slot riser for toolpost, std		standard
Automatic toolturret 8-pos. disc type		VDI 50 optional
Automatic toolturret 4-pos. head type		optional
Tailstock
Quill diameter, std. (optional)		4.9” ( 5.5”)
Quill taper, morse taper		MT 6
Quill stroke		11.8”
General
Voltage, standard		440v/3ph/60hz
Width of bed, TRI-V type		24.4” with extra HD V ways”
Total length of lathe		bc + 96”
Width of machine		110”	117”
Height of machine		83”	88”
Weight of Machine x 118”bc (approx.)		21,800 lbs	22,600 lbs
For each additional length 40” bc, ADD		2,200 lbs	2,200 lbs

TOOLMEX Machinery Division, is a National importer of European quality Machinery, specializing in MN/CNC long bed Lathes from 22" -98" swing x 78-572"bc with spindle bores from 4-25. We are located near Chicago, only 20 minutes from O'Hare airport.