TUR1350MN European Built Oil Country CNC Lathes

53" Swing

 

 

     

      Features

      • Heavy duty European lathes for larger oil country parts

      • 53" swing over bed x 78" - 629" bc

      • 2 or 3-way beds with front support way for apron

      • Siemens 840DSL Shop Turn or Fanuc 0iTD Manual Guide

      • Massive 40" / 43" wide bed, “solid” base from floor to front way (optional 4-way / 3-shear bed)

      • 8.6", 12.5", 14.2" 17.7", 22" or 26" spindle bores

      • Up to 75 HP, load capacity up to 30,800 lbs

      • High speeds handle wider range (8.6" bore to 700 RPM)

      • 3rd moveable hand wheel for easy toolsetting

      • Automatic shifting headstock

      • Gap bed allows swing up to 69" (TUR1550MN)

      • Full rear guarding and 1 front door guard

      • X-axis linear direct feedback scale standard

      • Z-axis linear measuring system for 236" and longer bc

      • Built-in chip conveyor standard

      • Rapids to 393 IPM reduces non-cut time

      • Heavy-duty tailstock rides on air cushion with carriage come-along for operator ease

      • Large 7.9" diameter quill with built-in live center

      • Wide range of options including power or manual chucks, power turrets, live tooling with C and Y axes, hydraulic or manual steadies, hydraulic tailstock, special extra heavy-duty spindle or extra heavy-duty steadies, 4-way / 3-shear bed, etc.

       

           
      Spindle bore available up to 26"
      (18" bore shown)
      Carriage with choice of turrets, control, linear bearings or block ways for X-axis Hydraulic tailstock with come-along, air assist lift

       


      Capacity / Model 53" TUR1350MN-OC
      Swing Over Bed 53.1"
      Swing Over Cross Slide 35.4"
      Distance Between Centers 78", 157", 236", 315", 393", 472", 551", 629" bc
      Max. Workpiece Weight in Chuck (Option) 4,400 lbs (8,000 lbs)
      Max. Workpiece Weight bc without Steadies (Option) 19,800 lbs (33,000 lbs)
      Max. Workpiece Weight bc with 2 Steadies 33,000 lbs
      Headstock
      Spindle Bore Available    .

      8.6", 12.5", 14.1", 17.7", 21.6", 26"

      # of Spindle Ranges, Autoshifting 2
      Spindle Speed Ranges with Applicable Bore

      8.6" 2-200 RPM, 12.5" 2-500 RPM, 14.1" 1-350 RPM, 17.7" 1-300 RPM, 21.6" 1-200 RPM, 26" On Request

      Main Drive Power, Siemens

      50 HP Continuous / 75 HP at 40% Duty

      Max. Turning Torque 6085 ft lb (8250 Nm)
      Carriage
      Cross Slide Travel, X-axis 29.5"
      Rapid Travels, Z and X axes 315 IPM / 393 IPM
      Max. Feed Force, X-axis 5,500 lbs f (25 kN)
      Max. Feed Force, Z-axis 7,700 lbs f (35 kN)
      Ball Screw Diameter, X-axis 1.57" (40mm)
      Ball Screw Diameter, Z-axis or Gear Drive (GD) 3.15" (80mm) Ball Screw for 78" & 157" bc or
      Master/Slave Dual Pinion & Rack Drive for 236"-629" bc
      Carriage Length Bearing on Ways 45.3"
      T-Slot Riser for Manual Toolpost Standard
      8-pos Disc Type Turret VDI 60 DIN79880, Optional
      4-pos Head Type Turret NG 40 DIN68881, Optional
      Tailstock
      Quill Diameter, Std. 7.9"
      Quill Taper with Built-In Live Quill MT6
      Quill Stroke 5.9"
      General
      Width of Bed (Option) 40.1" Top / 43.3" Base (New 4-way / 3-shear 70")
      Machine Width 116" / 130"
      Machine Height 100"
      Machine Weight, 157" bc 45,600 lbs
      Machine Weight, 236" bc 52,100 lbs


      Photos are a general representation of the various models and may include some optional equipment. 
      Guards are removed for photo purposes only.