TUR930MN European Built Oil Country CNC Lathes

37" Swing, TRI-V Bed

 

 

     

      Features

      • Superior extra heavy duty design, quality and performance for tougher parts work

      • 37" swing over bed x 78" - 393" (optional 43" swing, factory raised)

      • Extra heavy duty headstock for energy industry application

      • Fanuc or Siemens CNC with conversational/cycle "Job Shop" programming

      • Ideal turning and boring design with massive dual V-ways for carriage

      • 30/45 HP main drive with CSS and 2-range headstock (optional 50/60 HP)

      • Big oil country 8.6", 12.5",14.2" or 17.7" spindle bores

      • 24.5" wide TRI-V bed design with extra-wide V-ways

      • Full length cross slide (13" wide / 14" wide bridge)

      • Up to 11,000 lbs bc with steadies

      • Enhanced "thread repair" cycles

      • Heavy-duty tailstock with 5" diameter quill

      • Easy operator’s controls and independent traveling panel with swivel option

      • Wide range of options including turrets, extra heavy-duty chucks, steadies, C-axis with "live" tools, chip conveyor, boring bar attachments, independent 4-way bed, etc.

       

           
      Large 8.6"-17.7" spindle bores (12.5" shown) with rear nose for "dual" chucks Extra large TRI-V ways, and choice of Fanuc or Siemens CNC Extra heavy duty headstock, spindle and bearings

       


      Capacity / Model 8.6" BORE
      TUR930MN-OC
      12.5" BORE
      TUR930MN-OC
      Swing Over Bed 37.4" 37.4"
      Swing Over Cross Slide 24.8" 24.8"
      Distance Between Centers 78", 118", 157", 195", 236", 315", 393" (2-10m) 78", 118", 157", 195", 236", 315" (2-8m)
      Max. Workpiece Weight in Chuck 2,200 lbs 2,200 lbs
      Max. Workpiece Weight bc 8,800 lbs 8,800 lbs
      Headstock
      Spindle Bore 8.6" 12.5"
      Spindle Nose A2-15 A2-20
      Spindle Speed, 2-Range with CSS 4-700 RPM 4-500 RPM
      Main Drive Power, Siemens 30 HP Continuous / 45 HP at 40% Duty 30 HP Continuous / 45 HP at 40% Duty
      Main Drive Power, Optional 40 HP Continuous / 50 HP at 40% Duty 40 HP Continuous / 50 HP at 40% Duty
      Carriage
      Cross Slide Travel, X-axis 22.4" 22.4"
      Rapid Travels, Z and X axes 235 IPM 235 IPM
      Feed Force Cross, X-axis 3,300 lbs f (15 kN) 3,300 lbs f (15 kN)
      Feed Force Longitudinal, Z-axis 4,400 lbs f (20 kN) 4,400 lbs f (20 kN)
      Ball Screw Diameter, Z-axis, 78" - 236" bc 2.5" (63mm) 2.5" (63mm)
      Ball Screw Diameter, X-axis 1.6" (40mm) 1.6" (40mm)
      Carriage Length Bearing on Ways 31.9" 31.9"
      Cross Slide Width / Bridge x Length 13" / 14" x 41.3" 13" / 14" x 41.3"
      T-Slot Riser for Toolpost, Std. Standard Standard
      Automatic Toolturret 8-pos Disc Type VDI 50 Optional VDI 50 Optional
      Turret Options C-Axis, Live Tools, 4-Way, Y-Axis C-Axis, Live Tools, 4-Way, Y-Axis
      Tailstock
      Quill Diameter, Std. 4.9" 4.9"
      Quill Diameter, Option 6.3" 6.3"
      Quill Taper, Morse Taper MT6 MT6
      Quill Travel 11.8" 11.8"
      General
      TRI-V Bed, width (Optional independent 4-way bed) 24.5" with extra heavy duty V-ways (48") 24.5" with extra heavy duty V-ways (48")
      Machine Length bc + 96" bc + 96"
      Machine Width 118" 118"
      Machine Height 95" 95"
      Machine Weight, 118" bc 21,600 lbs 22,200 lbs
      Machine Weight, for each additional 40" bc, ADD 2,200 lbs 2,200 lbs


      Photos are a general representation of the various models and may include some optional equipment. 
      Guards are removed for photo purposes only.