Product List

• 112-1214-L7 :: WNMG 432-MF PH5115 WNMG 080408-MF PH5115, Turning Steel insert, 10 Pack, TMX
• 112-1269-R2 :: TNMG 332-MR PHG115 TNMG 160408-MR PHG115, Turning Steel insert, 10 Pack, TMX
• 112-1270-L9 :: TNMG 332-HR PH5740 TNMG 160408-HR PH5740, Turning Steel insert, 10 Pack, TMX
• 112-1277-L9 :: VNMG 332-ST PH5740 VNMG 160408 ST PH5740, 35° Diamond Neg. Turning Insert for General Purpose Machining Of Steel and Steel Castings at Low Cutting Speeds (MTCVD Coated), 10/pack, Toolmex
• 112-1293-R3 :: CNMG 322-MR PHG125 CNMG 090308-MR PHG125, Turning Steel insert, 10/Pack, TMX
• 112-1309-R3 :: TNMG 434-HR PHG125 TNMG 220416-HR PHG125, Turning Steel insert, 10/Pack, TMX
• 112-1325-I5 :: WNMG 332-SS PH6740 WNMG 060408 SS PH6740 80° Trigon Neg. Turning Insert used for Medium to Rough Machining of Steel and Stainless Steel at Low speeds (PVD Coated TiAln) 10/pack, Toolmex
• 112-1346-L5 :: DNMG 331-ST PH5705 DNMG 110404-ST PH5705, Turning Cast Iron insert, 10/Pack, TMX
• 112-1372-R2 :: WNMG 432-MW PHG115 WNMG 080408-MW PHG115, Turning Steel insert, 10/Pack, TMX
• 112-1482-L7 :: CNMG 433-MF PH5115 CNMG 120412-MF PH5115, Turning Steel insert, 10/Pack, TMX
• 112-1500-R2 :: DNMG 332-MR PHG115 DNMG 110408-MR PHG115, Turning Steel insert, 10/Pack, TMX
• 112-1508-L8 :: DNMG 433-MR PH5125 DNMG 150412-MR PH5125, Turning Steel insert, 10/Pack, TMX
• 112-1536-41 :: SNMG 543-MR PH2125 SNMG 150612 MR PH2125, 90° Square Neg. Turning Insert for Medium Roughing Of Steel and Steel Castings at Medium Cutting Speeds (CVD Coated), 10/pack, Toolmex
• 112-1560-L8 :: TNMG 333-MF PH5125 TNMG 160412-MF PH5125, Turning Steel insert, 10/Pack, TMX
• 112-1561-Y3 :: TNMG 333-MS PHH920 TNMG 160412-MS PHH920, Turning Heat Resistant Super Alloy insert, 10/Pack, TMX
• 112-1581-L9 :: VNMG 432-MR PH5740 VNMG 220408-MR PH5740, Turning Steel insert, 10pcs, TMX
• 112-1581-R2 :: VNMG 432-MR PHG115 VNMG 220408-MR PHG115, Turning Steel insert, 5/Pack, TMX
• 112-1581-R3 :: VNMG 432-MR PHG125 VNMG 220408-MR PHG125, Turning Steel insert, 10/Pack, TMX
• 112-1590-10 :: WNMG 433-MS PH0910 WNMG 080412-MS PH0910, Turning Aluminum/Brass insert, 10/Pack, TMX
• 112-1660-Y3 :: CCMT 21.52-MM PHH920 CCMT 060208-MM PHH920, Turning Stainless Steel insert, 10/Pack, TMX
• 112-1675-77 :: DCMT 21.50.5-FP PH6225 DCMT 070202 FP PH6225, 55° Diamond Pos. Turning Insert for Fine Finishing Of Steel and Stainless Steel at Medium Speeds (PVD Coated), 10/pack, Toolmex
• 112-1678-L7 :: DCMT 21.51-FP PH5115 DCMT 070204-FP PH5115, Turning Steel insert, 10/Pack, TMX
• 112-1683-G4 :: DCMT 21.52-MM PH7920 DCMT 070208-MM PH7920, Turning Stainless Steel insert, 10/Pack, TMX
• 112-1687-L8 :: CCMT 32.52-MP PH5125 CCMT 09T308-MP PH5125, Turning Steel insert, 10/Pack, TMX
• 112-1702-G4 :: TCMT 1.81.51-MM PH7920 TCMT 090204-MM PH7920, Turning Stainless Steel insert, 10/Pack, TMX
• 112-1711-R2 :: DCMT 32.51-FP PHG115 DCMT 11T304-FP PHG115, Turning Steel insert, 10/Pack, TMX
• 112-1726-68 :: CCGT 21.50.5-FS PH6920 CCGT 060202 FS PH6920, 80° Diamond Pos. Turning Insert for Fine Finishing Of High Temp Alloys (PVD Coated), 10/pack, Toolmex
• 112-1761-68 :: SCMT 32.51-MM PH6920 SCMT 09T304 MM PH6920, 90° Square Pos. Turning Insert for Medium Finishing of Stainless Steel (PVD Coated), 10/pack, Toolmex
• 112-1768-L8 :: SCMT 32.52-MP PH5125 SCMT 09T308-MP PH5125, Turning Steel insert, 10/Pack, TMX
• 112-1769-G4 :: SCMT 431-MM PH7920 SCMT 120404-MM PH7920, Turning Stainless Steel insert, 10/Pack, TMX
• 112-1780-68 :: VCMT 221-MM PH6920 VCMT 110304 MM PH6920, 35° Diamond Pos. Turning Insert for Medium Finishing Of Stainless Steel (PVD Coated), 10/pack, Toolmex
• 112-1790-G4 :: VBMT 332-MM PH7920 VBMT 160408-MM PH7920, Turning Stainless Steel insert, 10/Pack, TMX
• 112-1835-L7 :: TCMT 32.51-MM PH5115 TCMT 16T304-MM PH5115, Turning Stainless Steel insert, 10/Pack, TMX
• 112-1835-U4 :: TCMT 32.51-MM PHS215 TCMT 16T304-MM PHS215, Turning Stainless Steel insert, 10/Pack, TMX
• 112-1840-R3 :: TCMT 32.52-MP PHG125 TCMT 16T308-MP PHG125, Turning Steel insert, 10/Pack, TMX
• 112-1849-L8 :: TCMT 432-MP PH5125 TCMT 220408-MP PH5125, Turning Steel insert, 10/Pack, TMX
• 112-1874-X6 :: DCGT 32.50.5-FS PHH910 DCGT 11T302-FS PHH910, Turning Stainless Steel insert, 10/Pack, TMX
• 112-1896-10 :: TCGT 21.51-LN PH0910 TCGT 110204-LN PH0910, Turning Aluminum/Brass insert, 10/Pack, TMX
• 112-1898-10 :: TCGT 32.51-LN PH0910 TCGT 16T304-LN PH0910, Turning Aluminum/Brass insert, 10/Pack, TMX
• 112-1966-L6 :: TCMT 21.51-MK PH5320 TCMT 110204-MK PH5320, Turning Cast Iron insert, 10/Pack, TMX
• 112-1968-G4 :: TCMT 21.51-MM PH7920 TCMT 110204-MM PH7920, Turning Stainless Steel insert, 10/Pack, TMX
• 112-1968-L7 :: TCMT 21.51-MM PH5115 TCMT 110204-MM PH5115, Turning Stainless Steel insert, 10/Pack, TMX
• 112-1968-U4 :: TCMT 21.51-MM PHS215 TCMT 110204-MM PHS215, Turning Stainless Steel insert, 10/Pack, TMX
• 112-1971-R3 :: TCMT 21.52-MP PHG125 TCMT 110208-MP PHG125, Turning Steel insert, 10/Pack, TMX
• 112-3659-L7 :: VNMG 332-LC PH5115 VNMG 160408-LC PH5115, Turning Steel insert, 10/Pack, TMX
• 112-3747-U5 :: CNMG 431-SF PHS225 CNMG 120404-SF PHS225, Turning Stainless Steel insert, 10/Pack, TMX
• 112-3767-G4 :: WNMG 433-SF PH7920 WNMG 080412-SF PH7920, Turning Heat Resistant Super Alloy insert, 10/Pack, TMX
• 113-0261-86 :: GTN-4R 4 PH6135 GTN-4R 4 PH6135, Right Hand, part-off insert with 4 deg part off angle, 10Pack, Toolmex
• 181-0491-00 :: SN45 D4.00-A1.25/2.00-08-12 SN45 D4.00-A1.25/2.00-08-12, 4 Inch Diameter 45° 8 Flute Indexable Face Mill for SNHX 12 Inserts, Toolmex
• 181-0622-00 :: AP90 D1.25-W1.25/6.30-03-16 TMX AP90 1-1/4" Diameter 90° 3 Flute Indexable End Mill with 1-1/4" Weldon shank and 6.3" overall length, coolant feeding for APKT 16 Inserts includes screws and wrench
• 181-0785-00 :: AN90 D4.00-A1.25/2.00-09-10 AN90 D4.00-A1.25/2.00-09-10, 4 Inch Diameter 90° 9 Flute Indexable Face Mill for ANHX 10 Inserts, Toolmex
• 184-1981-00 :: SCI-075-0594-3D SCI-075-0594-3D, .594 Inch Diameter 3XD Indexable Drill for SPKX 05 Series Inserts, Toolmex
• 184-1993-00 :: SCI-125-0938-3D SCI-125-0938-3D, .938 Inch Diameter 3XD Indexable Drill for SPKX 07 Series Inserts, Toolmex
• 184-1998-00 :: SCI-125-1063-3D SCI-125-1063-3D, 1.063 Inch Diameter 3XD Indexable Drill for SPKX 07 Series Inserts, Toolmex
• 184-1999-00 :: SCI-125-1094-3D SCI-125-1094-3D, 1.094 Inch Diameter 3XD Indexable Drill for SPKX 07 Series Inserts, Toolmex
• 184-2000-00 :: SCI-125-1125-3D SCI-125-1125-3D, 1.125 Inch Diameter 3XD Indexable Drill for SPKX 09 Series Inserts, Toolmex
• 184-2011-00 :: SCI-150-1500-3D SCI-150-1500-3D, 1.500 Inch Diameter 3XD Indexable Drill for SPKX 11 Series Inserts, Toolmex
• 184-2030-00 :: SCI-100-0813-4D SCI-100-0813-4D, .813 Inch Diameter 4XD Indexable Drill for SPKX 06 Series Inserts, Toolmex
• 184-2032-00 :: SCI-125-0875-4D SCI-125-0875-4D, .875 Inch Diameter 4XD Indexable Drill for SPKX 07 Series Inserts, Toolmex
• 184-2039-00 :: SCI-125-1063-4D SCI-125-1063-4D, 1.063 Inch Diameter 4XD Indexable Drill for SPKX 07 Series Inserts, Toolmex
• 188-0031-68 :: 16 IR W 11 PH6920 16 IR 11.0 W PH6920, (3/8" IC), Internal R.H. Threading insert, 10/Pack, TMX
• 188-0045-68 :: 16 IR A60 PH6920 16 IR A60 PH6920, (3/8" IC), Internal R.H. Threading insert, 10/Pack, TMX
• 188-0616-68 :: 16 ER UN 16 PH6920 16 ER 16.0 UN PH6920, (3/8" IC), External R.H. Threading insert, 10/Pack, TMX
• 188-0775-68 :: 16 IL AG60 PH6920 16 IL AG60 PH6920, (3/8" IC), Internal L.H. Threading insert, 10/Pack, TMX
• 188-1123-68 :: 22 ER STACME 4 PH6920 22 ER STACME 4 PH6920, (1/2" IC), Stub Acme, External Right Hand Lay Down Style Threading Insert, 10/pack, Toolmex
• 2-445-030 :: UnvrBvl Protractor/Parts,Magnifier Universal Bevel Protractors -Parts, Magnifier
• 20JM-3-1-18 :: 230/460V 143JM 1HP 1765RPM PREMIUM PUMP Elektrim Premium TEFC IP55 1800RPM cast iron foot mounted JM Close Coupled Pump motor features a high 1.4 service factor, oversized bearings and VPI and is ideal for horizontal and vertical fluid transfer applications.
• 20JM-3-1-18/575 :: 575V 143JM 1HP 1765RPM PREMIUM PUMP Elektrim Premium 575V Close-Coupled 20JM Series TEFC IP55 1800RPM cast iron C-Face electric motor features a 1.15 service factor, oversized ball bearings, VPI, and VFD 20:1VT.
• 20JM-3-1.5-18 :: 230/460V 145JM 1.5HP 1750RPM PREM PUMP Elektrim Premium TEFC IP55 1800RPM cast iron foot mounted JM Close Coupled Pump motor features a high 1.4 service factor, oversized bearings and VPI and is ideal for horizontal and vertical fluid transfer applications.
• 20JM-3-1.5-18/575 :: 575V 145JM 1.5HP 1750RPM PREM PUMP Elektrim Premium 575V Close-Coupled 20JM Series TEFC IP55 1800RPM cast iron C-Face electric motor features a 1.15 service factor, oversized ball bearings, VPI, and VFD 20:1VT.
• 20JM-3-1.5-18/PR :: 230/460V 143JM 1745RPM JM PUMP Elektrim 1800RPM IP55 TEFC JM Close Coupled Pump motor for ODP replacement in horizontal and vertical fluid applications comes equipped with VPI and oversized bearings on both ends.
• 20JM-3-1.5-36 :: 230/460V 143JM 1.5HP 3540RPM PREM PUMP Elektrim Premium TEFC IP55 3600RPM cast iron foot mounted JM Close Coupled Pump motor features a high 1.4 service factor, oversized bearings and VPI and is ideal for horizontal and vertical fluid transfer applications.
• 20JM-3-1.5-36/575 :: 575V 143JM 1.5HP 3540RPM PREM PUMP Elektrim Premium 575V Close-Coupled 20JM Series TEFC IP55 3600RPM cast iron C-Face electric motor features a 1.15 service factor, oversized ball bearings, VPI, and VFD 20:1VT.
• 20JM-3-10-18 :: 230/460V 215JM 10HP 1770RPM PREMIUM PUMP Elektrim Premium TEFC IP55 1800RPM cast iron foot mounted JM Close Coupled Pump motor features a high 1.3 service factor, oversized bearings and VPI and is ideal for horizontal and vertical fluid transfer applications.
• 20JM-3-10-18/575 :: 575V 215JM 10HP 1770RPM PREMIUM PUMP Elektrim Premium 575V Close-Coupled 20JM Series TEFC IP55 1800RPM cast iron C-Face electric motor features a 1.15 service factor, oversized ball bearings, VPI, and VFD 20:1VT.
• 20JM-3-10-18/PR :: 230/460V 213JM 1750RPM JM PUMP Elektrim 1800RPM IP55 TEFC JM Close Coupled Pump motor for ODP replacement in horizontal and vertical fluid applications comes equipped with VPI and oversized bearings on both ends.
• 20JM-3-10-36 :: 230/460V 215JM 10HP 3535RPM PREMIUM PUMP Elektrim Premium TEFC IP55 3600RPM cast iron foot mounted JM Close Coupled Pump motor features a high 1.3 service factor, oversized bearings and VPI and is ideal for horizontal and vertical fluid transfer applications.
• 20JM-3-10-36/575 :: 575V 215JM 10HP 3535RPM PREMIUM PUMP Elektrim Premium 575V Close-Coupled 20JM Series TEFC IP55 3600RPM cast iron C-Face electric motor features a 1.15 service factor, oversized ball bearings, VPI, and VFD 20:1VT.
• 20JM-3-10-36/PR :: 230/460V 213JM 3490RPM JM PUMP Elektrim 3600RPM IP55 TEFC JM Close Coupled Pump motor for ODP replacement in horizontal and vertical fluid applications comes equipped with VPI and oversized bearings on both ends.
• 20JM-3-15-18 :: 230/460V 254JM 15HP 1775RPM PREMIUM PUMP Elektrim Premium TEFC IP55 1800RPM cast iron foot mounted JM Close Coupled Pump motor features a high 1.3 service factor, oversized bearings and VPI and is ideal for horizontal and vertical fluid transfer applications.
• 20JM-3-15-18/575 :: 575V 254JM 15HP 1775RPM PREMIUM PUMP Elektrim Premium 575V Close-Coupled 20JM Series TEFC IP55 1800RPM cast iron C-Face electric motor features a 1.15 service factor, oversized ball bearings, VPI, and VFD 20:1VT.
• 20JM-3-15-36 :: 230/460V 254JM 15HP 3540RPM PREMIUM PUMP Elektrim Premium TEFC IP55 3600RPM cast iron foot mounted JM Close Coupled Pump motor features a high 1.3 service factor, oversized bearings and VPI and is ideal for horizontal and vertical fluid transfer applications.
• 20JM-3-15-36/575 :: 575V 254JM 15HP 3540RPM PREMIUM PUMP Elektrim Premium 575V Close-Coupled 20JM Series TEFC IP55 3600RPM cast iron C-Face electric motor features a 1.15 service factor, oversized ball bearings, VPI, and VFD 20:1VT.
• 20JM-3-15-36/PR :: 230/460V 215JM 3500RPM JM PUMP Elektrim 3600RPM IP55 TEFC JM Close Coupled Pump motor for ODP replacement in horizontal and vertical fluid applications comes equipped with VPI and oversized bearings on both ends.
• 20JM-3-2-18 :: 230/460V 145JM 2HP 1745RPM PREMIUM PUMP Elektrim Premium TEFC IP55 1800RPM cast iron foot mounted JM Close Coupled Pump motor features a high 1.4 service factor, oversized bearings and VPI and is ideal for horizontal and vertical fluid transfer applications.
• 20JM-3-2-18/575 :: 575V 145JM 2HP 1745RPM PREMIUM PUMP Elektrim Premium 575V Close-Coupled 20JM Series TEFC IP55 1800RPM cast iron C-Face electric motor features a 1.15 service factor, oversized ball bearings, VPI, and VFD 20:1VT.
• 20JM-3-2-18/PR :: 230/460V 145JM 1745RPM JM PUMP Elektrim 1800RPM IP55 TEFC JM Close Coupled Pump motor for ODP replacement in horizontal and vertical fluid applications comes equipped with VPI and oversized bearings on both ends.
• 20JM-3-2-36 :: 230/460V 145JM 2HP 3525RPM PREMIUM PUMP Elektrim Premium TEFC IP55 3600RPM cast iron foot mounted JM Close Coupled Pump motor features a high 1.4 service factor, oversized bearings and VPI and is ideal for horizontal and vertical fluid transfer applications.
• 20JM-3-2-36/575 :: 575V 145JM 2HP 3525RPM PREMIUM PUMP Elektrim Premium 575V Close-Coupled 20JM Series TEFC IP55 3600RPM cast iron C-Face electric motor features a 1.15 service factor, oversized ball bearings, VPI, and VFD 20:1VT.
• 20JM-3-2-36/PR :: 230/460V 143JM 3495RPM JM PUMP Elektrim 3600RPM IP55 TEFC JM Close Coupled Pump motor for ODP replacement in horizontal and vertical fluid applications comes equipped with VPI and oversized bearings on both ends.
• 20JM-3-20-18 :: 230/460V 256JM 20HP 1775RPM PREMIUM PUMP Elektrim Premium TEFC IP55 1800RPM cast iron foot mounted JM Close Coupled Pump motor features a high 1.2 service factor, oversized bearings and VPI and is ideal for horizontal and vertical fluid transfer applications.
• 20JM-3-20-18/575 :: 575V 256JM 20HP 1775RPM PREMIUM PUMP Elektrim Premium 575V Close-Coupled 20JM Series TEFC IP55 1800RPM cast iron C-Face electric motor features a 1.15 service factor, oversized ball bearings, VPI, and VFD 20:1VT.
• 20JM-3-20-18/PR :: 230/460V 254JM 1760RPM JM PUMP Elektrim 1800RPM IP55 TEFC JM Close Coupled Pump motor for ODP replacement in horizontal and vertical fluid applications comes equipped with VPI and oversized bearings on both ends.
• 20JM-3-20-36 :: 230/460V 256JM 20HP 3540RPM PREMIUM PUMP Elektrim Premium TEFC IP55 3600RPM cast iron foot mounted JM Close Coupled Pump motor features a high 1.3 service factor, oversized bearings and VPI and is ideal for horizontal and vertical fluid transfer applications.
• 20JM-3-20-36/575 :: 575V 256JM 20HP 3540RPM PREMIUM PUMP Elektrim Premium 575V Close-Coupled 20JM Series TEFC IP55 3600RPM cast iron C-Face electric motor features a 1.15 service factor, oversized ball bearings, VPI, and VFD 20:1VT.
• 20JM-3-20-36/PR :: 230/460V 254JM 3500RPM JM PUMP Elektrim 3600RPM IP55 TEFC JM Close Coupled Pump motor for ODP replacement in horizontal and vertical fluid applications comes equipped with VPI and oversized bearings on both ends.
• 20JM-3-25-18 :: 230/460V 284JM 25HP 1780RPM PREMIUM PUMP Elektrim Premium TEFC IP55 1800RPM cast iron foot mounted JM Close Coupled Pump motor features a high 1.2 service factor, oversized bearings and VPI and is ideal for horizontal and vertical fluid transfer applications.
• 20JM-3-25-18/575 :: 575V 284JM 25HP 1780RPM PREMIUM PUMP Elektrim Premium 575V Close-Coupled 20JM Series TEFC IP55 1800RPM cast iron C-Face electric motor features a 1.15 service factor, oversized ball bearings, VPI, and VFD 20:1VT.
• 20JM-3-25-18/PR :: 230/460V 256JM 1755RPM JM PUMP Elektrim 1800RPM IP55 TEFC JM Close Coupled Pump motor for ODP replacement in horizontal and vertical fluid applications comes equipped with VPI and oversized bearings on both ends.
• 20JM-3-25-36 :: 230/460V 284JM 25HP 3555RPM PREMIUM PUMP Elektrim Premium TEFC IP55 3600RPM cast iron foot mounted JM Close Coupled Pump motor features a high 1.2 service factor, oversized bearings and VPI and is ideal for horizontal and vertical fluid transfer applications.