TUR1550MN/CNC European Built Manual Plus CNC Lathes

61" Swing

 

 

     

      Features

      • 61" swing over bed x 78" - 629" bc

      • 2 or 3-way beds with front support way for apron

      • Siemens 840DSL Shop Turn or Fanuc 0iTD Manual Guide

      • Massive 40" / 43" wide bed, "solid" base from floor to front way, optional 4-way 3-shear bed

      • Big 5.5", 8.6", 12.5", 14.2" 17.7", 22" or 26" spindle bores

      • Up to 75 HP, load capacity up to 30,800 lbs

      • High speeds handle wider range (5.5" bore to 900 RPM)

      • 3rd moveable hand wheel for easy toolsetting

      • Automatic shifting headstock

      • Gap bed allows swing up to 69" (TUR1550MN)

      • Full rear guarding and 1 front door guard

      • X-axis linear direct feedback scale standard

      • Z-axis linear measuring system for 236" and longer bc

      • Built-in chip conveyor standard

      • Rapids to 393 IPM reduces non-cut time

      • Heavy-duty tailstock rides on air cushion with come-along for operator ease

      • Large 7.9" diameter quill with built-in live center

      • Wide range of options including power or manual chucks, power turrets, live tooling with C and Y axes, hydraulic or manual steadies, hydraulic tailstock, special extra heavy-duty spindle or steadies, load capacity up to 80,000 lbs, 4-way 3-shear bed, etc.

       

           
      Extra wide front V-way, heavy ribbed "solid" bed, gap for increased swing Carriage with choice of turrets, control, linear bearings or block ways for X-axis Hydraulic tailstock with come-along, air assist lift

       


      Capacity / Model 61" TUR1550MN
      Swing Over Bed 61"
      Swing Over Cross Slide 43.3"
      Distance Between Centers 78", 157", 236", 315", 393", 472", 551", 629" bc
      Swing Over Gap 68.9"
      Length of Gap (from Spindle Face) 22.8"
      Max. Workpiece Weight in Chuck (Option) 4,400 lbs
      Max. Workpiece Weight bc without Steadies (Option) 19,800 lbs (30-60,000 lbs)
      Max. Workpiece Weight bc with 2 Steadies 33,000 lbs
      Bed
      Width of Bed, Top / at Base (4-way / 3-shear) 40.1" / 43.3" (51" / 71")
      Height of Bed 30"
      Headstock
      Spindle Bore, Std. 5.5"
      Spindle Bore, Optional 8.6", 12.5", 14.2", 17.7", 22", 26"
      # of Spindle Ranges, Autoshifting 2
      Spindle Speed Ranges with 5.5" Bore 2-200 RPM and 180-900 RPM
      Main Drive Power (Option) 50 HP Continuous / 75 HP at 40% Duty  (75 HP)
      Max. Turning Torque 6085 ft lb (8250 Nm)
      Spindle Nose, 5.5" A2-15
      Carriage
      Cross Slide Travel, X-axis, 2-way bed 30.5"
      Rapid Travels, Z and X axes 315 IPM / 393 IPM
      Max. Feed Force, X-axis 5,500 lbs f (25 kN)
      Max. Feed Force, Z-axis 7,700 lbs f (35 kN)
      Ball Screw Diameter, X-axis 1.57" (40mm)
      Ball Screw Diameter, Z-axis or Gear Drive (GD) 3.15" (80mm) Ball Screw for 78" & 157" bc or
      Dual Pinion & Rack Drive for 236"-629" bc
      Carriage Length Bearing on Ways 45.3"
      T-Slot Riser for Manual Toolpost Standard
      8-pos Disc Type Turret VDI 60 DIN79880, Optional
      4-pos Head Type Turret NG 40 DIN68881, Optional
      Tailstock
      Quill Diameter, Std. (Options) 7.9" (11" / 16")
      Quill Taper with Built-In Live Quill MT6
      Quill Stroke 5.9"
      General
      Machine Length bc + 126"
      Machine Width 120" / 136"
      Machine Height 108"
      Machine Weight, 157" bc (4-way / 3-shear) 47,300 lbs
      Machine Weight, 236" bc (4-way / 3-shear) 52,800 lbs


      Photos are a general representation of the various models and may include some optional equipment. 
      Guards are removed for photo purposes only.