31.5" or 37" Swing x 78" - 472" bc, 5.5" - 12.6" bores, TRI-V Bed
Features:
- • 32” or 37" swing over bed, 19” or 25” over cross slide x 78" - 708" bc
- • NEW “solid” bed more rigid; allowing options to increase swing capacity (part diameter & length), load capacities bc and 4-way beds with turn-through steadies
- • New bed permits operator better access to work, tooling and setups resulting in improved productivity with less effort
- • Chose Fanuc or Siemens controls to operate in limited Manual, Cycle or full CNC modes
- • Ideal turning and boring design with massive dual V-ways for carriage
- • 30/40 HP main drive with CSS and 2-range headstock (options 40-60 HP)
- • Modular design offers big 5.5", 8.6", 12.5" or 14.1" spindle bores with higher max speed ranges (1800 -350 rpm)
- • 24.5" wide TRI-V bed design (optional 4-way bed)
- • Handle parts up to 8,800 lbs. bc as standard (option to15,400 lbs.)
- • Tailstock with 5" diameter quill as standard (option for HD 6.3” dia with built in bearings)
- • Easier operator’s control with overhead and independent traveling swivel panel & electronic handwheels
- • Modular design offering a wider range of options including: turrets, hydraulic chucks and steadies, C-axis with "live" tools, chip conveyor, boring bar att., Y axis, extra heavy-duty headstock and/or tailstock, increased load capacities between centers, increased cutting torque, partial to full guarding (1-5 doors), 4-way bed, etc.
 |
 |
 |
Optional Fanuc control panel, swivel and independent travel along Z-axis |
8-position disc turret and extended cross slide with rear T-slots |
Tailstock with 4.5" diameter quill with MT6 and center come-along |
Specifications:
|
TUR 800 SMN |
TUR 930 SMN |
Swing Over Bed |
31.5" |
37.4" |
Swing Over Cross Slide |
19.7" |
24.8" |
Control |
Fanuc or Siemens |
Fanuc or Siemens |
Distance Between Centers |
78" - 472" |
78" - 472" |
Main Drive Motor, Continuous/40% Duty |
30HP/35HP (30/40HP) |
30HP/40HP (40/50HP) |
Standard Spindle Bore |
5.5" |
5.5" |
Optional Spindle Bores |
6.3", 8.6" or 12.6" |
6.3", 8.6" or 12.6" |
Spindle Speeds, Standard Bore |
6-1800 RPM |
4-1200 RPM |
Max Load Capacity (Option) |
11,000 lbs (15,000 lbs) |
11,000 lbs (15,000 lbs) |
Z-Axis Rapid Traverse Rate |
236 IPM |
236 IPM |
Tailstock Quill Diameter |
MT 6 |
MT 6 |
Bed Width with TRI-V ways, Solid Bed |
24.5" |
24.5" |
Machine Weight, 157" bc |
29,000 lbs |
29,000 lbs |
Click to view Optional Lathe Equipment