Item Number: 3-780-0500

3 Jaw, 5" (135 mm) Diameter, Plain Back, High Speed, Hydraulic, Power, Lathe Chuck, Large Bore, 1.2992” Through Hole, Drawbar, Max Gripping Force 35(3570) N(kgf), 1.5mm x 60 Serrated Jaw Interface, 10mm to 135mm Jaw Capacity, 7,000 RPM, Steel Body
Print Print this page
images/3-780-0500_back.jpgimages/3-780-0500_top.jpg
logos/TMX_wTag_RGB.jpg
Chuck Size in 5
Spindle Nose A2-4
Thru Hole in(mm) 1.299 (33)
Jaw Stroke in(mm) 0.213 (5.4)
Plunger Stroke in(mm) 0.394 (10)
Gripping Dia Max in(mm) 5.315 (135)
Gripping Dia Min in(mm) 0.394 (10)
Max Pull Force lbf(kgf) 3806 (1730)
Max Gripping Force lbf(kgf) 7854 (3570)
Max Speed RPM 7000
Weight lb (kg) 13.42 (6.1)
A in(mm) 5.315 (135)
B in(mm) 2.362 (60)
C in(mm) 4.331 (110)
D in(mm) 2.501 (63.513)
E in(mm) 0.787 (20)
F in(mm) 0.157 (4)
G in(mm) 3.78 (96)
K in(mm) 3-M10x1.5P
I1 in(mm) 3-M8x1.25P
H1 in(mm) PCDØ145
L in(mm) 0.591 (15)
M 0.551 (14)
N max in(mm) 1.031 (26.2)
N min in(mm) 0.925 (23.5)
O max in(mm) 0.748 (19)
O min in(mm) 0.236 (6)
P max in(mm) 0.039 (1)
P min in(mm) -0.354 (-9)
H in(mm) 3.252 (82.6)
J in(mm) 1.299 (33)
Q in(mm) 0.984 (25)
R in(mm) 0.394 (10)
S in(mm) 0.787 (20)
T in(mm) 0.079 (2)
U M40x1.5P
V in(mm) 0.472 (12)
W in(mm) 1.24 (31.5)
X in(mm) 2.441 (62)